Home | Products | Wood Processing Equipment - Machines and Tools


Horizontal band sawmill HBS-3


Horizontal band sawmill HBS-3 is designed for longitudinal sawing of logs on the edged and unedged timber. Band sawmill HBS-3 model allows to conduct longitudinal sawing of logs with a diameter up to 1000mm and length up to 6200mm.

It is possible to provide by sawmill of any cutting length on order. It is also possible to carry out sawing of unedged boards on the squared beam or the edged board.

Depending on the hardness of wood and its type HBS-3 provides performance of up to one cubic meter per hour.

Feeding of the sawing unit along the site of sawn log is executed manually. Lowering and rising of the sawing unit to set the thickness of the board is executed by screw with electric drive. Thickness of the board is controlled visually by a special line. The log is mounted on a table by the stops and clamping.

The tension force of the saw is controlled by the manometer. The HBS-3 must be protected from direct precipitation and installed indoors or outdoors under cover.

Technical specification (HBS-3):
Specification Property:
Max. log diameter mm 1100
Max. kerf width, mm 800
Max. board thickness, mm 300
Feeding speed, m/min 2 - 20
Sawing precision, mm 1/1 000
Kerf thickness, mm 2 - 3
Sawing speed, mm/sec 30
Saw drive power, kW 11(15)
Log length (any on order), m 0,9 - 7,2



Horizontal band sawmill HBS-2


Horizontal band sawmill HBS-2 is designed for longitudinal sawing of logs on the edged and unedged timber.

Band sawmill HBS-2 model allows to conduct longitudinal sawing of logs with a diameter up to 900mm and length up to 6200mm. It is possible to provide by sawmill of any cutting length on order.

It is also possible to carry out sawing of unedged boards on the squared beam or the edged board.

Depending on the hardness of wood and its type HBS-2 provides performance of up to one cubic meter per hour. Feeding of the sawing unit along the site of sawn log is executed manually.

Lowering and rising of the sawing unit to set the thickness of the board is executed by screw with electric drive.

Thickness of the board is controlled visually by a special line. The log is mounted on a table by the stops and clamping.

The tension force of the saw is controlled by the manometer. The HBS-2 must be protected from direct precipitation and installed indoors or outdoors under cover.

Technical specification (HBS-2):
Specification Property:
Max. log diameter mm 900 (1000)
Max. kerf width, mm 700 (800)
Max. board thickness, mm 300
Feeding speed, m/min 2 - 20
Sawing precision, mm 1/1 000
Kerf thickness, mm 2 - 3
Sawing speed, mm/sec 30
Saw drive power, kW 7,5 (11)



Horizontal band sawmill HBS-1


Horizontal band sawmill HBS-1 is designed for longitudinal sawing of logs on the edged and unedged timber.

Simple design, small size and low power consumption allows you to use it in the farms, carpentry shops or directly at the construction sites.

It is used in individual farms and sawmills of small and medium power.

Sawing is performed by band saw which is rotated through the two pulleys.

The log is based on the track of the machine between the limits and pressed by the screw clamps.

Technical specification (HBS-1):
Specification Property:
Max. log diameter mm 700
Max. board thickness, mm 300
Feeding speed, m/min 250
Sawing precision, mm 1/1 000
Kerf thickness, mm 2 – 3
Sawing speed, mm/sec 22
Saw drive power, kW 4







Longitudinal trimming machine (LTM-1)


Longitudinal trimming machine LTM1 is designed for the cutting of board on the squared beam or edging board with thickness up to 80mm.

The standard model of the machine has a stroke up to 4.6m At the customers’ request the machines are made of any length.

Principle of operation of the machine is based on the cutting of stationary set board on a table by a moving carriage. Clamping of the board at the time of cutting is executed by adjustable pressure rollers.

Width of the sawing workpiece is controlled by rulers or by dimensional limiters. Longitudinal feed of carriage is performed manually or can be equipped with automatic feed, thus increasing of labor productivity. The laser simulator of cutting can be mounted on the machine.

Technical specification (LTM-1):
Specification Property:
Max. sawing board width, mm 700
Max. cut-off board width, mm 240
Ñutting thickness, mm 10 – 80
Sawing length (any on order), mm 4600
Saw diameter, mm 300
Seat (inner) saw diameter,mm 32 or 50
Saw rotating speed, rpm 2880
Saw drive power, kW 5,5
Sawing precision, mm 1/500





Machine miter MSM-1


Machine miter MSM-1 is designed for the crosscut sawing of board and squared beam with thickness up to 85mm and a width up to 450mm.

The saw with electro motor is mounted on the carriage, which provides moving of saw parallel over the plane of the table.

Feeding of the saw unit is carried out manually. The 3kW engine provides high performance of the machine.

The special saw for cross cutting with diameter of 350mm (400mm) provides sufficient purity of cutting surface.

At the customer’s request the machine is equipped with table and rollers. It is recommended for furniture and joinery industries of any complexity.





Technical specification (MSM-1):
Specification Property:
Max. board thickness, mm 85
Cutting length (max. board width), mm 450
Saw rotating speed, rpm 2880
Saw drive power, kW 3
Saw diameter, mm 350 (400)
Seat (inner) saw diameter, mm 32 or 50







Machine miter MSM-4


The machine miter with a pneumatic drive MSM-4 is designed for the crosscut sawing of board and squared beam in a semi-automatic mode.

Clamping and cutting of a workpiece is carried out simultaneously in automatic mode.

The machine design allows it to saw a squared beam up to 100mm thick, without any additional adjustment of thickness.

Feeding of saw is pneumatically operated. The machine can be provided by the laser cutting simulator.

At the customer’s request the machine can be equipped with rollers of any length.





Technical specification (MSM-4):
Specification Property:
Max. board profile, mm 100x100 or 250x50
Saw rotating speed, rpm 2880
Saw drive power, kW 2,2
Air pressure, MPa 0.4 – 0.6
Saw diameter, mm 400
Seat (inner) saw diameter, mm 32 or 50







Machine miter MSM-5


The machine miter with a pneumatic drive MSM-5 is designed for the crosscut sawing of board and squared beam in a semi-automatic mode.

Clamping and cutting of a workpiece is carried out simultaneously in automatic mode.

The machine design allows it to saw a squared beam up to 100mm thick, without any additional adjustment of thickness.

Feeding of saw is pneumatically operated. The machine can be provided by the laser cutting simulator.

At the customer’s request the machine can be equipped with rollers of any length.





Technical specification (MSM-5):
Specification Property:
Max. board profile, mm 45õ150; 100õ220; 50õ350
Saw rotating speed, rpm 3900
Saw drive power, kW 4 (5.5)
Air pressure, MPa 0.4 – 0.6
Saw diameter, mm 450
Weight, kg 95







Vertical band sawmill VBS-1


Vertical band sawmill VBS-1 is designed for straight-line sawing squared beams and boards on workpieces. The machine can be equipped with a rollers table and drive feed. >





Technical specification (VBS-1):
Specification Property:
Max. board thickness, mm 250
Sawing pulleys diameter, mm 480
Power drive, kW 3
Band saw dimensions, mm 3300õ0,8-1õ32-35
Cutting speed, mm/s 30
Overall dimensions L B H, mm 990õ910õ1750










Grinding machine GM-2


Grinding machine GM-2 is designed for the high-quality sharpening in the automatic mode of band saw blades with width 10 - 60mm, thickness 0.6 - 2mm. For high-performance sharpening are used special CBN grinding wheels.

Design of the device allows sharpening the saws up to 60 mm wide with a very high quality and productivity.

Sharpening speed of band saw is around tooth per second, which provides the speed 4 times more than the usual universal sharpening devices. Tooth profile is exactly the profile of grinding wheel.

Coolant is fed in the cutting zone while sharpening the saw.





Technical specification (GM-2):
Specification Property:
Voltage, V 3-phase - 380 (1-phase - 220)
Grinding wheel drive power, W 550
Grinding wheel dimension, mm 203õ32õ22
Width of sharpening saw, mm 27 – 60
Saw thickness, mm 0,8 – 1,4
Grinding speed, m/s 49






Grinding machine GM-1


Grinding machine GM-1 is designed for the sharpening in the automatic mode of band saw blades with width 10 - 60mm, thickness 0.6 -2mm.

Tooth profile is provided by a special former. To obtain a different profile you need to replace the former.

The formers at different profile and step of the band saw blades are manufactured on special order.The standard version of the machine is equipped by a device for sharpening saws with the 22mm former of tooth pitch of the Wood-Mizers’ profile.

GM-1 allows you to sharpen the band saw blade with 7mm to 25mm tooth pitch. Time for sharpening of four-meter saw with 22mm pitch tooth is 25-40 minute. Feeding of band saw is adjustable.





Technical specification (GM-1):
Specification Property:
Voltage, V 220
Grinding wheel drive power, kW 120
Grinding wheel dimension, mm 150õ32õ6
Saw width, mm 10 – 60 / 10 – 35
Saw thickness, mm 0,6 – 2
Grinding speed, m/s ~ 10-60 (saw length- 4m, tooth pitch - 22mm)





Setting machine DWS-2


Setting machine DWS-2 is designed for manual setting and dimension control of band saws for woodworking machinery. It includes a counter and guides to support the band saw blade, as well as an indicator to indicate the setting parameters of the teeth.

The lever of the setting device is made as a handle, which serves for moving the saw within the tooth pitch and for the pressure on the saw blade to give the necessary tooth setting. Time for setting of four-meter length saw blade with 22mm tooth pitch is up to 5 minutes.

In order to make it easier for an operator to read of the instrument reading it is provided an opportunity of adjusting the tilt of the device for sharpening.

The lever of the machine is made in a form of the rotating handle with which the operator can easily operate. The machine provides precise setting of saw teeth. The delivery kit includes a counter and guides to support the band saw blade during the setting.





Technical specification (DWS-2):
Specification Property:
Band saw blade width, mm 10 – 60
Band saw blade thickness, mm 0.6 – 2
Average setting time, min 5




Machines and Tools

Different machines, tools and parts included wood processing.